General Features
Frequency Range | VHF: 136-174 MHz UHF: 400 – 470 MHz |
Channel Capacity | 256 (128 analog + 128 digital) |
Zone | 3 |
Channel Spacing | 12.5 / 25 kHz |
Dimensions | 112 x 54 x 31 mm |
Weight | 270 g |
Supported Operating Modes | DMR Tier II according to ETSI TS 102361-1 / 2/3 |
Operating Voltage | 7.4 V (nominal) |
Standard Battery | 1500 mAh (lithium-ion battery) |
Battery (5/5/90) | Analog: Approx. 12/16 hours (at 1500 mAh) Approx. 16/22 hours (at 2000 mAh) |
Frequency Stability | ± 0.5 ppm |
Antenna Impedance | 50 Ω |
Output Power | VHF: 1/5 W UHF: 1/4 W |
Modulation | 11K0F3E at 12.5 kHz 16K0F3E at 25 kHz |
4FSK Digital Modulation | 12.5 kHz (data only): 7K60FXD 12.5 kHz (data and voice): 7K60FXW |
Interfering Signals and Harmonics | (-36 dBm (<1 GHz) -30 dBm (> 1 GHz) |
Modulation Limitation | ± 2.5 kHz at 12.5 kHz ± 5.0 kHz at 25 kHz |
Noise Suppression | 40 dB at 12.5 kHz 45 dB at 25 kHz |
Adjacent Channel Selectivity | 60 dB at 12.5 kHz 70 dB at 25 kHz |
Audio Response | (+1 dB to -3 dB) |
Nominal Audio Distortion | ≤ 3% |
Digital Audio Encoder Type | AMBE + 2 ™ |
Sensitivity (Analog) | 0.22 μV (12 dB SINAD) 0.22 μV (typical) (12 dB SINAD) 0.4 μV (20 dB SINAD) |
Sensitivity (Digital) | 0.22 μV / BER 5% |
Adjacent Channel Selectivity | TIA-603: 60 dB at 12.5 kHz / 70 dB at 25 kHz ETSI: 60 dB at 12.5 kHz / 70 dB at 25 kHz |
Intermodulation | TIA-603: 70 dB at 12.5 / 25 kHz ETSI: 70 dB at 12.5 / 25 kHz |
False Response Rejection | TIA-603: 70 dB at 12.5 / 25 kHz ETSI: 70 dB at 12.5 / 25 kHz |
Signal-to-Noise Ratio (S/N) | 40 dB at 12.5 kHz 45 dB at 25 kHz |
Nominal Audio Power Output | 0.5 W |
Nominal Audio Distortion | ≤ 3% |
Audio Response | (+1 dB to -3 dB) |
{{ Hytera_PD415[0].table3t10 }} | <-57 dBm |
Operating Temperature Range | (-30 °C to +60 °C) |
Storage Temperature Range | (-40 °C to +85 °C) |
ESD | IEC 61000-4-2 (level 4) ± 8 kV (contact) ± 15 kV (air) |
Dust and Moisture Protection | IP54 Standard |
Shock and Vibration Resistance | MIL-STD-810 C / D / E / F / G |
Relative Humidity | MIL-STD-810 C / D / E / F / G |